If cotton candy clouds and pastel-colored zebras are not your jam for your baby’s rocking crib, then dare to go rustic over cutesy. Go ahead. Depart from the standard baby pink and pastel blue patterns.
A woodsy type of rustic rocking cradle will look great as long as you ensure that it is as safe as it is appealing. Safety over beauty, function over form — that should be the primary concern when choosing a wood plan for your rustic rocking crib project.
Here are some important guidelines to remember.
Before getting started, allot one day for building this project.
Read the instructions properly to avoid mishaps. Prepare the materials and tools according to the plan.
Invest in durable lumber and make sure that the wood is visually good and perfectly straight. It is necessary to tightly lock all the parts together so you will definitely need a handful of sturdy galvanized screws and waterproof glue.
Before building the rocking crib, apply several coats of wood stain on the wooden parts. This will make sure that the crib has that rustic vibe.
Bear in mind, rocking cribs are designed to make a motion that gently rocks the baby. Therefore the ends must have bumpers that stop rocking motions under the safe angle. To stop the rocking, you can use stoppers made out of wood. Prepare wood cubes of 70 millimeter in height.
Now back to the main project. It’s time to glue up the lumber in the square according to the sizes indicated in your wood plan.
Cut the compound miters and set it at 75 and 1/2 degrees and tilt the saw table at 43 ¼ degrees – the appropriate angles for a 15-degree side tilt. Of course, your woodworking plan could have different figures. It’s best to follow it to the letter.
Slant all the bottom edges at 15 degrees and then band and saw the curved edges.
Put together the sides and the ends using screws under wood plugs.
The bottom must overhang one inch all around and molded with a style B molding head knife.
Attach the rockers and mount with screws and wood brackets. You’d need to do good old straight band sawing for the rockers.
Apply waterproof glue to the tops of the rockers and put them against the bottom of the rocking crib below the pre-drilled screw holes. Insert the screws to make sure it’s secured.
Don’t forget to dab some glue in every screw hole and put a wooden-plug in each. Gently tap the plug with a hammer to make sure it’s positioned in the hole.
And voila! Your rustic rocking baby crib is done! Let’s hope the older kids don’t get jealous and demand to have their own rocking beds!
Here’s a smart hack. If you divide the measurements in this wood pattern in two, it can turn into a doll’s rocking cradle. How cool is that?
Wait. Don’t forget the crib sheet! To evoke a warmer and cozier vibe, a checkered flannel made from cotton is the best option. This soft sheet is the soothing final touch to your rustic rocking baby crib.
Please Share This Article 🙂
